Valcom ONE-WAY PAGING SYSTEM Bedienungsanleitung Seite 12

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 19
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 11
102B Setup
The VE6023 extends a Valcom IP paging system to a phone system. As a result, a few additional
pieces of Valcom equipment are required before a page can be received from a phone. At a minimum, a
device that can source pages is needed. All the paging equipment must be programmed with Valcom's
VIP-102B IP Solutions Tool.
Before attempting to configure the Valcom devices, please ensure the network is configured to support
IP paging. The network should support broadcast and multicast traffic within local subnets and
multicast traffic among all subnets where Valcom IP devices are connected. If the network cannot be
configured to support these protocols, some features of the IP paging solution may not be available.
Please contact Valcom Technical Support for details.
After the endpoint devices are connected to an appropriately configured network, programming is
accomplished through the use of the VIP-102B IP Solutions Setup Tool. This software tool should be
installed on a Microsoft Windows based computer connected to the same network as the Valcom IP
devices.
The general procedure for programming Valcom IP devices involves the following steps:
Install the devices on the network.
Scan the network using the VIP-102B IP Solutions Tool to create an inventory of the available
devices.
Program the devices with IP addresses and other network information appropriate to the
physical network on which the devices are installed.
Rescan the network to allow the IP Solutions Tool to retrieve complete device configuration
information.
Configure the individual device settings within the IP Solutions Tool for each device on the
network with the specific settings necessary for the paging system being installed.
Upload the new configuration to each device from the IP Solutions Tool.
Restart the device to enable the new configuration settings.
For more information, refer to the VIP-102B IP Solutions Setup Tool Reference Manual.
VE6023 Telephone Page Server - User Manual Page 12
Seitenansicht 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

Kommentare zu diesen Handbüchern

Keine Kommentare