Valcom VSP-V-2925A Bedienungsanleitung PDF herunterladen

VSP-V-2925A

Issue 3

1 947212

TALKBACK INTERCOM SYSTEM

V-2925A - ADD ON EXPANSION UNIT

FOR THE V-2924A

The basic V-2924A Talkback Intercom System provides 24 stations with one-way, two-way, group call and all call

pages. The V-2925A Expansion Unit is an add on unit for the V-2924A. Each V-2925A Expansion Unit will

expand the V-2924A by twenty-four (24) additional stations. Up to three (3) Expansion Units can be added to a

system for a total of 48, 72, or 96 zones of paging.

The V-2925A can ONLY be used with the V-2924A. If you have the V-2924 model, please contact Technical

Support for assistance.

WARNING: Disconnect main power before servicing.

Mounting

• Plug the Expansion Unit into the Control Unit. For the first Expansion Unit, insert the P1 connector from the

Expansion Unit into the P8 connector on the Control Unit (Refer to Figure 1 for location of connectors). (For

each additional Expansion Unit, insert P2 into P1 – Refer to Figure 1 of the Control Unit document).

• Close latches attached to the top and bottom of the Expansion Unit over the keepers on the top and bottom of

the Control Unit.

• Drill holes into backboard through mounting flanges on the Expansion Unit.

• Insert screws into holes and tighten screws firmly.

Connections

Each Expansion Unit requires (2) 66B type punchdown blocks. Mount these on the backboard near the associated

Expansion Unit. Make connections to the punchdown blocks as specified in Figure 2 – Punchdown Block

Connections.

Setting Option Switches

All options programmed for the Control Unit are available on the additional stations provided by the Expansion

Units. The only switches on the Expansion Unit requiring attention are those for Background Music. Refer to

Figure 1 for location and Table 1 for the default values of these switches. Make changes as desired for the various

zones.

Dimensions/Weight

• 17.5”H x 8.37”W x 3.06”D

(44.45cm H x 21.26cm W x 7.77cm D)

• 11 lbs. (5.0 kg)

Operation

Same as Control Unit.

V-2924A with V-2925A Expansion Unit.

1 2 3 4 5 6

Inhaltsverzeichnis

Seite 1 - TALKBACK INTERCOM SYSTEM

VSP-V-2925AIssue 31 947212TALKBACK INTERCOM SYSTEMV-2925A - ADD ON EXPANSION UNITFOR THE V-2924AThe basic V-2924A Talkback Intercom System provides 24

Seite 2 - 2 947212

2 947212P4P2SW1P3 ACPowerFuseP1P1Side View Top ViewPowerLED115/230 SwitchFIGURE 1 - V-2925A CONTROL AND CONNECTOR LOCATIONSP1P2P3P4SW1 - BGM Group Se

Seite 3 - 3 947212

3 947212FIGURE 2 - PUNCHDOWN BLOCK CONNECTIONSBlock P3 - Switch Inputs Block P4 – Speaker OutputsExpansionUnit #1*ExpansionUnit #2*ExpansionUni

Seite 4 - Table 2 - Numbering Plan

4 947212Table 1 - Background Music Options Background MusicSwitch OFF Switch ONStations Main Board SW11-6 SW1-1No BGM group 1 BGM group 17-12 SW1-2No

Seite 5 - Table 3 - Page Dial Codes:

5 947212Table 3 - Page Dial Codes:GroupsDial Code Main Board Expansion 1 Expansion 2 Expansion 312345678910111213141516#10external allcall#11system al

Seite 6 - TECHNICAL ASSISTANCE

6 947212TROUBLESHOOTING CHARTProblem Corrective ActionNo system operation.• Verify AC voltage is present at the receptacle.• Check the fuse located

Kommentare zu diesen Handbüchern

Keine Kommentare

Valcom VSP-V-2925A Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Türsprechanlagen Valcom VSP-V-2925A herunter. Valcom VSP-V-2925A User's Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern